top of page

3" AC/DC Solar Pumps - Generator/Grid Compatible

image.png
image.png

The TBS 3" AC/DC stacked impeller (centrifugal) water pumps are designed to operate using direct solar power or a 230Vac generator. The 3" diameter makes this pump an ideal selection for narrow well casing installs where 4" diameter pumps are not compatible. This product has an above-ground solar drive that features NC/NO digital contacts for use with float and pressure switch controls.. The above-ground drive also allows for adjustable top end RPM for GPM control in low producing wells along with robust system protections (over-voltage, under-voltage, over-current, lost phase, etc.).

  • External Motor Drive 

  • 2.99" Motor Diameter

  • Stacked Impeller Pump Design

  • 60-380Vmp Solar Voltage Range

  • 150-240Vac AC Voltage Range

  • In Field Top End RPM Adjustment            For GPM Control

 

TBS AC/DC helical water pumps are designed for low flow (2-12GPM) and high head (50-800ft) applications. These pumps are capable of operating off direct solar power or 120/230Vac generator power. Made with simplicity in mind, TBS 4" pumps have built-in motor drives as well as a plug and play monitoring device for AC/DC power transfer and digital system controls (float switch, pressure switch, etc.).

Sizing Charts - Helical Design

2-3 GPM

Up to 800'TDH

3TBS-4H-AC

Comparable to Grundfos 3SQF-3 and 6SQF-3

4-6GPM

Up to 625'TDH

6TBS-4H-AC

Comparable to Grundfos 6SQF-2 and 6SQF-3

8-12GPM

 Up to 400'TDH

12TBS-4H-AC

Comparable to Grundfos 11SQF-2

Sized based on 350-400w 72 Cell solar panels

Downloadable Wire Sizing Calculator

 

TBS AC/DC stacked impeller (centrifugal) water pumps are designed for operating off direct solar or 120/230Vac generator power. TBS 4" pumps have built-in motor drives as well as a plug and play monitoring device for AC/DC power transfer and digital system controls (float switch, pressure switch, etc.). The perfect option for varying flow rate requirements and high TDS water content where helical pumps are not viable.

Stacked Impeller Pump Ends

DC Built-in(3).png

Stainless steel impellers fitted on floating clearance rings made of a synthetic low abrasion material and techno polymer diffusers that impart significant wear resistance

Built-in check valve just above pump shaft

Built in motor controls allow for dual power operation (DC or 1ph AC power) as well as motor protections such as over-temperature, overload, dry well and over/under-voltage

BLDC motor for efficient variable speed operation

4"

Motor Diameter

Sizing Charts - Stacked Impeller Design

7TBS-4C-AC

7-15GPM

Up to 450' TDH

Unique Production Compared to Grundfos SQF products

13TBS-4C-AC

10-20GPM

Up to 200' TDH

Compare to the 5SQF-80

15TBS-4C-AC

10-30GPM

Up to 500' TDH

Compare to the 5SQF-80

25TBS-4C-AC

20-40GPM

Up to 125' TDH

Comparable to Grundfos 25SQF-2

40TBS-4C-AC

25-60GPM

Up to 100' TDH

Comparable to Grundfos 40SQF-2

Sized based on 350-400w 72 Cell solar panels

Downloadable Wire Sizing Calculator

ThunderbirdSolar-03 (1).png

Thunderbird Solar

720-340-2352

4777 Leyden Street Denver, CO 80216

© 2025 by Thunderbird Solar Supply LLC

bottom of page